We use cookies to offer you a better website experience. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
- General
- Automotive
- Auction
- Contest
- e-rousseau
- 1.866.463.4270
- [email protected]
What's the capacity of your mobile workstation?
Article by Rébecca Dubé | 7 October 2016
A few weeks ago, we published an article on the load capacity of fixed workstations. In the same vein, this article focuses on the capacity of your mobile workstation!
All of the following capacities have been tested on 72" W x 30" D products and vary according to the type of top. These figures are valid for all workstations of this size or smaller. The capacities listed apply only to tops provided by Rousseau. The weights assume that the load is evenly distributed over the workstation surface. This load should include the weight of additional accessories. Furthermore, all applicable models must be assembled according to the recommendations in the assembly guide.
The capacity of your product is determined by three parameters:
- The type of configuration. The image below will help you identify the number of your configuration. The green highlighted features will help you to quickly identify the product you have. If you cannot find your configuration in the image below, contact us!
- The type of top. The options are: wood, painted steel, stainless steel, galvanized steel, laminate, laminated acrylic or dissipative.
- The type of application. The options are: static or dynamic. Static use of a mobile workstation is a type of application in which the product is rarely moved and/or over very short distances (e.g., to clean behind the product). Dynamic use would refer to a type of application in which the product is regularly moved and/or over very long distances (e.g., for plant maintenance). You will notice that some of the configurations have only been tested in dynamic applications. This is therefore the reference value that you can trust for both applications.
Do you have this information? Now refer to the section corresponding to your configuration number.
Configuration 1: Workstation on casters
This workstation includes a footrest, four corner gussets, and 4" or 6" casters. It can also be a closed workstation with shelf and rear panel. The capacity indicated below is its capacity in dynamic applications.
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| Incompatible | Incompatible | 850 lb. | 475 lb. | 475 lb. |
Configuration 2: Workstation on casters
This workstation includes two stringers, and 4" or 6" casters. The capacity indicated below is its capacity in dynamic applications.
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 500 lb. | 500 lb. | 700 lb. | 325 lb. | 325 lb. |
Configuration 3: Workstation on casters with a cabinet
This workstation includes a footrest, two corner gussets, an 18" wide L cabinet, and 4" or 6" casters. Note that the weight inside the cabinet must not exceed 400 lb. in this type of application. This weight should also be deducted from the capacity indicated below. The capacity indicated below is its capacity in dynamic applications.
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| Unavailable | Unavailable | 475 lb. | 275 lb. | 275 lb. |
Configuration 4: Workstation on casters with a cabinet
This workstation includes a footrest, 4" casters, and an 18" wide L cabinet. Note that the weight inside the cabinet must not exceed 400 lb. in this type of application. This weight should also be deducted from the capacity indicated below.
Static capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 880 lb. | 880 lb. | 880 lb. | 775 lb. | 880 lb. |
Dynamic capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 200 lb. | 200 lb. | 275 lb. | Incompatible | Incompatible |
Configuration 5: Workstation on casters with a cabinet
This workstation includes a footrest, 6" casters, and an 18" wide L cabinet. Note that the weight inside the cabinet must not exceed 400 lb. in this type of application. This weight should also be deducted from the capacity indicated below.
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 1 100 lb. | 1 100 lb. | 1 800 lb. | 775 lb. | 1 200 lb. |
Dynamic capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 200 lb. | 200 lb. | 275 lb. | Incompatible | Incompatible |
Configuration 6: Joined mobile cabinets
This configuration includes cabinets joined together and 4" casters. The capacity was calculated assuming an average weight of 400 lb. in each cabinet. The capacity indicated below is its capacity in dynamic applications.
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 780 lb. | 780 lb. | 780 lb. | 780 lb. | 780 lb. |
Configuration 7: Workstation on casters with two cabinets
This workstation includes a footrest, 4" casters, and two 18" wide L cabinets. Note that the weight inside the cabinets must not exceed 400 lb. in this type of application. This weight should also be deducted from the capacity indicated below.
Static capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 1 680 lb | 1 680 lb. | 1 680 lb. | 1 680 lb. | 1 680 lb. |
Dynamic capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 200 lb. | 200 lb. | 275 lb. | Incompatible | Incompatible |
Configuration 8: Workstation on casters with two cabinets
This workstation includes a footrest, 6" casters, and two 18" wide L cabinets. Note that the weight inside the cabinets must not exceed 400 lb. in this type of application. This weight should also be deducted from the capacity indicated below.
Static capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 2 200 lb. | 2 200 lb. | 2 200 lb. | 2 200 lb. | 2 200 lb. |
Dynamic capacity
| Painted Steel Top WS10 |
Stainless Steel Top WS12 |
Wood Top WS14 |
Laminate/Dissipative Top WS08/16/17 |
R Stainless / Painted / Galvanized Steel Top RC35/36/37 |
| 200 lb. | 200 lb. | 275 lb. | Incompatible | Incompatible |
Keywords: Mobile workstation, mobile workbench, load, load capacity, capacity, load capacity chart, find load capacity, top, hardwood top, steel top, laminate, laminated top, plastic laminate top, maximum weight, max weight, maximum load, max load, caster load capacity, wheel load capacity, max weight casters, max weight wheels, mobile work table